Euro Pine Cut Stock Blocks
General specifications
All blocks to be kiln dried EWP with a moisture content 8-12%
All blocks should have the pitch set at an industry standard
All blocks should be knot free
All blocks should be wane free
All blocks should be crack free
All blocks should be free of sap pockets
All blocks should be cut square
All blocks should have milled edges and one clean face. "Hit and miss" is ok on one face
No tapered blocks
No wavy edges
No cupping
All blocks should be clear with no stain (stain blocks can be pulled and saved if need be)
All blocks to be stacked on pallets as tight as possible and tally to allow for air spaces
Thickness
4/4 blocks to be 7/8" thick (22.2250 mm),
plus or minus 1/32" (.7938 mm)
5/4 blocks to be 1 1/4" thick (31.75 mm),
plus or minus 1/32" (.7938 mm)
Width
3" blocks 2 3/4" wide (69.85 mm)
4" blocks 3 3/4" wide (95.25 mm)
5" blocks 4 3/4" wide (120.65 mm)
6" blocks 5 3/4" wide (146.05 mm)
8" blocks 7 1/2" wide (190.5 mm)
All widths to be plus or minus 1/16" (1.5875 mm) (NO TAPER)
Length
3" to 6" blocks to be of random lengths of 5 7/8" to 22" long
(149.225 mm to 558.8 mm) with an average length of 10" (254 mm)
8" blocks to be of random lengths of 7" to 17" long (177.8 mm to 431.8 mm) with an average length of 10" (254 mm)
Packing
All blocks to be stacked on pallets 42 x 42 with no more than 775bf per pallet.
All pallets to be squarely stacked for shipping and tally purposes.
All pallets to be wrapped tightly with stretch wrap with top boards and bands across the top.
No staples in the blocks.
All pallets to marked with size, vendors name and board footage of the pallet
Pallets to have at least 2 3/4" bottom fork clearance